Use the layout stick to see how the tiles fit on the wall. Lay the tiles on a floor and mark the layout stick with a pencil at the joints between tiles. You can test your dry fit pattern by making a layout stick, which can be made from any straight and level piece of spare wood.You don't want to make a mistake or have to spend a lot of time thinking about it once the mortar is up on your wall. Dry fitting is especially important if your tiles make up a pattern, since you will need to be very comfortable creating that pattern.You can also use a tile cutter, but this is more likely to end in broken tiles so only take this option if using cheaper tiles. If you don't own a diamond tipped wet saw, you can usually rent one from your local major hardware store.You'll need 9.6 tiles for each row to cover that space, meaning nine full tiles and one cut to 3.6" You're putting up subway tile and the tiles are 6", with spaces of 1/4" between each of them. So, for example, let's say your wall to tile is five feet long. Measure how much space you need for each row with the spaces and cut tiles to size using a diamond tipped wet saw. You will probably need only a part of a tile when it comes to some of these areas, so it will be necessary to cut the tiles to size. Once you're comfortable with how it looks, figure out how the tiles will meet up with the corners and edges of your wall. Dry fit your tiles to be sure that they will look the way you want them to look. 1 July 2020.ĭry fit and then cut tiles to size using a diamond wet saw. Home Renovation & Repair Specialist Expert Interview. X Research source Tiling board is installed just like drywall (nailed to the studs) but is made of more water resistant materials which will keep it from warping and cracking your tile work.
0 Comments
Leave a Reply. |